Last Modified: 11-29-2007 1.6 D
Service Category: Audio/Visual/Telematics Section: Navigation/Multi Info Display
Model Year: 2008 Model: Sequoia Doc ID: RM000001YZ502PX
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: BLUETOOTH TEL CHECK MODE (2008 Sequoia)

BLUETOOTH TEL CHECK MODE

HINT:

Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed area may not be exactly the same as on the actual vehicle.

1. ENTER DIAGNOSTIC MODE NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: DTC CHECK / CLEAR (2008 Sequoia)

2. "BLUETOOTH" TEL CHECK

(a) Select ""Bluetooth" TEL Check" from the "Diagnosis MENU" screen.

3. "BLUETOOTH" CHECK

(a) Select ""Bluetooth" Check" from the ""Bluetooth" Handsfree Check Menu" screen.

(b) Select "Serial Communication Log" from the ""Bluetooth" Check Menu" screen.

(1) The communication log data in the navigation receiver are displayed on this screen.

HINT:

The displayed data can be used as a reference.

(c) Select "Software Version" from the ""Bluetooth" Check Menu" screen.

(1) Check the software version of the "Bluetooth" module.

Screen description:

Display

Content

General Version/*1
  • Overall software version of "Bluetooth" module
  • If any of the API version, upper stack version, and low stack version is updated, the general version is upgraded.

API Version/*2

API software version is displayed.

Upper Stack Version/*3

Upper stack version is displayed.

Lower Stack Version/*4

Lower stack version is displayed.

HINT:

This function is controlled by the navigation receiver.

4. HANDSFREE VOICE QUALITY SET

(a) Select "Handsfree Voice Quality Set" from the ""Bluetooth" Handsfree Check Menu" screen.

(b) Check the handsfree voice level.

Screen description:

Display

Content

Received voice level adjustment/*1

Setting possible for the voice level received from "Bluetooth" compatible phones.

Sent voice level adjustment/*2

Setting possible for the voice level sent to "Bluetooth" compatible phones.

HINT:

This function is controlled by the navigation receiver.

NOTICE:

"Voice Quality Type" should not be changed.